A backed-up drain or a water heater that stopped working overnight is the call we hear most often from Canby. It is not glamorous work, but it is the work that matters when it happens to you. We handle the full range of residential and commercial plumbing in Canby and the surrounding area, any hour of the day, any day of the week. From a slow kitchen drain to a burst pipe behind the wall, calls are answered, jobs are scoped on the phone, and the price is confirmed before anyone is scheduled.
Canby is a town where a lot of the housing stock is older, and older homes carry older pipe. Galvanized supply lines, clay sewer laterals, and fixtures that have been repaired a few times already are the norm rather than the exception. We work on all of it. Whether the call comes from a homeowner dealing with a recurring clog or a landlord managing a rental that needs a water heater replaced before the next tenant moves in, the process is the same: you call, we scope it, you get a price.
A slow drain usually means a buildup of grease, soap, or debris in the line. A drain that won't move at all, or one that backs up into another fixture when you flush, points further down. We clear clogs at the fixture level and clean main sewer lines when the problem is deeper in the system. For lines that keep blocking despite cleaning, a camera inspection shows what is actually happening inside the pipe. Hydro jetting clears buildup that a standard snake won't touch, and it is often the right call when a sewer line has been slow for a long time rather than suddenly blocked.
A wet spot on the ceiling or a cabinet floor that stays damp even after you dry it usually means water is moving somewhere it should not be. We use pressure testing and electronic detection to find leaks behind walls and under floors without opening up more than necessary. The cause of a leak gets explained, not just patched, because a fix that holds starts with understanding what broke in the first place.
A pipe that has split, whether from age, a hard freeze, or a fitting that finally gave out, needs to be addressed before the water does more damage. We locate the break, confirm the scope, and repair or replace the affected section. In crawlspace construction, which is common across this region, the lines are reachable without major demolition in most cases.
A shutoff valve that won't close fully is a problem you won't notice until you need it. When a pipe is leaking and the valve under the sink won't stop the flow, the whole house water supply has to come off instead. We replace failed shutoff valves, main water shutoffs, and isolation valves throughout the supply system. It is a straightforward repair that prevents a much bigger problem later.
We work on the gas lines that supply water heaters and appliances, including the connection, the shutoff, and the supply run to the unit. If a gas line needs to be extended, relocated, or repaired, that is plumbing work and it is within our scope. We do not service heating and cooling equipment, but the line that feeds it is ours to handle.
Municipal water in this part of Oregon is naturally soft, so whole-home softening is rarely the right call here. Where filtration makes sense, whether for taste, sediment, or a specific water quality concern, we install the appropriate system and connect it properly to the supply line. The right filter depends on what the water actually contains, and we talk through that on the call before recommending anything.
No hot water is one of the most disruptive plumbing problems in a home. We repair and replace tank water heaters and install tankless units for customers who want on-demand hot water. Most homes in this region run on electric water heaters, and we work on all common residential configurations. When a unit is past repair, we confirm the replacement scope and price before scheduling the install.
Pricing is confirmed on the call, before anything is scheduled. When you describe the situation, we ask the questions that help us scope the job accurately: which fixture is affected, how long it has been happening, whether the problem is isolated or showing up in multiple places. That conversation is what produces a real number rather than a range.
What moves a quote is what the fault turns out to be and what has to come apart to reach it. A drain cleaning on a single fixture is a different job from clearing a main sewer line. A shutoff valve replacement under a sink is a different job from replacing the main shutoff at the meter. If the job is opened up and something unexpected is found, we stop and talk through it before continuing. You are not handed a different number at the end without a conversation first.
The price you get on the call covers what was scoped during that conversation. No pressure and no gimmicks, just sound, lasting plumbing and a clear explanation of what the work involves.
Sometimes a repair does not hold. Sometimes a quote from another plumber does not add up, and you want a second set of eyes before committing to a large job. We take those calls.
If a previous repair has failed, we diagnose the cause rather than repeating the same fix. A leak that comes back in the same spot usually means the underlying problem was not fully addressed the first time. We look at what was done, assess what is actually going on with the pipe, and give you a clear picture of what the right repair involves.
If you are partway through a job that stalled, whether a fixture install that was started and left, or a pipe repair that was roughed in but not finished, we can take it over. We scope what is already done and what remains, and we tell you what completing it involves before we start.
Repiping means replacing the supply lines that run throughout the property, and it is the repair that ends the cycle of recurring leaks and pressure problems when the pipe itself is the source. In older homes across this region, galvanized steel supply lines are the most common candidate. They corrode from the inside out, gradually narrowing the pipe interior until flow drops and leaks start appearing at different joints.
When a home has had two or three supply line repairs in different locations within a short period, or when the water pressure has dropped across the whole house rather than at one fixture, the pipe material is usually the answer. A repipe addresses the source rather than the symptom.
Most properties in this area are built over a vented crawlspace, which makes supply lines reachable without major demolition. We work through the crawlspace and through access points in walls and ceilings where needed. Floors and finishes are protected throughout, and most jobs leave the home looking the same as it did when the work began.
Water is typically off for portions of the work day and restored each evening. The full scope and timeline are confirmed before anything starts. Let us handle the plumbing and the permits.
Repiping is worth a conversation when: recurring leaks keep showing up in different spots, water pressure has dropped across the whole house, the water at the faucet is discolored or carries a metallic taste, or the pipe material is known to be failing. Polybutylene pipe, found in some homes built between the 1970s and 1990s, has its own failure pattern and often calls for full replacement rather than spot repair.
We take calls around the clock, every day of the week, including nights, weekends, and holidays. There is no distinction between business hours and after-hours here because there is only one set of hours and it covers the whole week. Emergency calls, including burst pipes, major leaks, and complete main line blockages, are answered and scoped the same way at any hour.
For non-emergency work, scheduling is straightforward. You call, we scope the job, you get a price, and the appointment is set. If the property has a tenant in place, we talk through access on the call so the visit can be arranged around the tenant's schedule. For commercial properties that need to stay operational, we work around the business rather than the other way around.
This is a local operation, and every customer matters. Call this morning. Get a straight answer about the pipes. That is how we work. The wider scope of the work is on the services page.
We serve Canby as our primary service town in this part of Clackamas County. We also cover the surrounding communities, including Barlow, Aurora, Wilsonville, Oregon City, and Mulino. If your address is outside Canby proper, call and ask. Coverage extends to most of the area, and we confirm it on the same call as the job scope.
If a job requires a second visit to complete work that was already scoped and priced, call and describe the situation. What is charged for a return visit depends on why the return is needed and what remains to be done. We talk through it on the call rather than applying a blanket policy.
Properties on private roads sometimes have shared or independently maintained supply lines rather than a direct city connection. Describe the setup on the call and we will scope the work based on what is actually in place. The repair approach depends on where the line runs and who is responsible for it.
It depends on the appliance and the existing connections. A new dishwasher, refrigerator with a water line, or water heater may need a new supply connection, a shutoff valve, or a gas line extension. Describe the appliance and what is already in place on the call and we will scope what the connection involves.
Yes. Property managers and landlords with multiple addresses can call and discuss how to handle recurring or multi-property work. We scope each job individually, but a single call can cover multiple addresses if you want to coordinate work across a portfolio.
Older homes in this area commonly have galvanized steel supply lines that have narrowed over time, clay or cast-iron sewer laterals that are susceptible to root intrusion, and shutoff valves that have not been turned in years and no longer close fully. Recurring leaks at different joints, low pressure across multiple fixtures, and drains that back up seasonally are the symptoms we see most often. If any of those sound familiar, a call to scope the situation is the right first step.
For most repairs, the work is confirmed as functional before we leave. For jobs like a repipe or a sewer line replacement where the system is put back into service after a significant change, it is worth monitoring for a short period and calling if anything seems off. We will tell you what to watch for before we leave.
Locate the main water shutoff for the property and turn it off to stop the flow. If you can reach a fixture-level shutoff valve that is closer to the break and it closes fully, use that instead.
Once the water is off, call (503) 746-9419 and we will scope the situation on the phone and get the repair scheduled as quickly as the current schedule allows.
Moving standing water away from flooring and walls while you wait helps limit the damage.
We serve Canby and the surrounding communities in Clackamas County, including Barlow, Aurora, Wilsonville, Oregon City, and Mulino. If you are not sure whether your address falls within our range, call and ask. Coverage questions are answered on the same call as the job scope, so there is no need to figure it out before you reach us.
Getting a second opinion on a large job is a reasonable thing to do. If you have a quote from another contractor and want to understand what it covers, call and describe the scope. We can tell you what a repipe of that type typically involves and give you a price to compare against.
From a clogged drain to a full repipe, we handle residential and commercial plumbing throughout Canby and Clackamas County.
Call Gresham Plumbing Company at (503) 746-9419 for a quote.
The job is scoped on the phone, the price is confirmed before we schedule, and the work gets done right. We take short-notice work and emergency calls, so if the problem will not keep, call now and we will find out how soon we can be out.
We reach these towns too: Gladstone, Oatfield, Damascus.
Everywhere else we go is in our service area.
We handle the full range of residential and commercial plumbing work in Canby, from a slow drain to a full sewer line replacement. Call to get the job scoped on the phone and a price confirmed before anything is scheduled. The table below covers what each service includes, who it fits best, and what is worth knowing before you call.
| Service Type | Scope of Work | When to Call | Good to Know |
|---|---|---|---|
| Water Heater Repair & Replacement | Tank and tankless unit repair, Full replacement when repair is not the right answer, Urgent no-hot-water calls, New unit sizing and installation | Homeowners dealing with inconsistent hot water, a failing unit, or no hot water at all | Replacement is often the more cost-effective answer once a tank unit is past a certain point. We scope it on the call so you know which way makes sense |
| Sewer & Main Line Service | Main sewer line clearing and cleaning, Camera inspection of the lateral, Root intrusion removal, Line repair and spot replacement | Properties with slow drains across multiple fixtures or a main line that backs up repeatedly | In Canby, mature tree roots and older clay laterals make main line problems common, especially after a wet season |
| Garbage Disposal Service | Disposal repair and reset, Full disposal replacement, Drain connection and seal check, Jam clearing and motor diagnosis | Homeowners with a disposal that hums but will not spin, leaks at the base, or has stopped working entirely | A disposal that leaks at the sink flange or at the drain connection is often a seal issue. A unit that hums without spinning usually has a jammed flywheel |
Call (503) 746-9419 to get the job scoped and a price confirmed before anything is scheduled.
(503) 746-9419